R.S. Covenant ● Ladies’ Silver Ring With Round Cut Cubic Zirconia Shop

First Impressions First: All stones are hand set; most are prong set in the same manner as fine gold jewelry. You won’t find a lot of glue in Covenant rings, but when you do, you can rest assured that steps have been taken to insure that the finest materials have been used to produce the best results.

Stones: Only genuine Cubic Zirconia and Swarovski crystal are used to represent our diamond-like styles. We also use genuine stones such as tiger eye, onyx, opal, garnet, amethyst and sometimes ruby, sapphire or emerald.

Beneath the Surface: The finish is the most important part of any piece of fine costume jewelry. Covenant rings have the best finish that money can buy. Every casting of brass-alloy or sterling silver is hand polished before going to the plater. Electroplating is a three stage process; first copper, then nickel and finally pure gold or precious rhodium are electronically bonded to the surface of the ring. In the case of our brass-alloy rings, Covenant’s is the only factory that inspects each piece during the plating process. After copper is applied, each ring is re-inspected to be sure the surface has no flaws. Any defects found are sent back to polishing before going back to plating.

Our silver rings are made using precious sterling silver. Sterling is the term used to define the highest standard for measuring silver. Specifically, it is an alloy consisting of 92.5% pure silver and 7.5% copper. This mixture of metals has led to the mark “.925” which is used by most manufacturers, including Covenant, to designate the purity of their silver products. After polishing, the rings are electroplated with a layer of precious rhodium, which gives them the look of white gold or platinum, and eliminates tarnishing.

The results are dramatic. Take a close look at our rings and you will see our quality reflected. Our rings truly look real!

All rings come with an unconditional guarantee.

R.S. Covenant Jewelry Care

Like fine jewelry, Covenant jewelry is subject to wear.

· When not in use, store in a safe dry area.
· Avoid contact with cosmetics, hand lotion and hair spray.
· Remove when doing dishes or any heavy, dirty work.
· If stones become dull or cloudy, use a liquid jewelry cleaner and follow directions on the label.
To return your jewelry:

• Package your jewelry in a box to insure against further damage in shipping.
• Please do not use anything you wish to be returned.
• Enclose it with your name, address, number or email, along with a money order (personal checks cannot be accepted), for $5.95 U.S. or $14.95 Canadian per ring to cover postage and handling. Allow 4-8 weeks for return.

Send to: R. S. Covenant, Inc. P.O. Box 78, O’Fallon, MO 63366
Jewelry that has been abused in any way may be subject to a moderate service charge.